e 3 ds21206 rev. 9 - 2 1 of 3 kbj4005g-kbj410g www.diodes.com diodes incorporated kbj4005g - kbj410g 4.0a glass passivated bridge rectifier case: kbj case material: molded plastic. ul flammability classification rating 94v-0 moisture sensitivity: level 1 per j-std-020c terminals: finish - tin. plated leads, solderable per mil-std-202, method 208 polarity: molded on body mounting: through hole for #6 screw mounting torque: 5.0 in-lbs maximum ordering information: see last page marking: type number weight: 4.6 grams (approximate) mechanical data glass passivated die construction high case dielectric strength of 1500v rms low reverse leakage current surge overload rating to 120a peak ideal for printed circuit board applications ul listed under recognized component index, file number e94661 lead free finish, rohs compliant (note 4) single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. maximum ratings and electrical characteristics @ t a = 25c unless otherwise specified _ a b d j k c e g h l m n p r kbj dim min max a 24.80 25.20 b 14.70 15.30 c 4.00 nominal d 17.20 17.80 e 0.90 1.10 g 7.30 7.70 h 3.10 3.40 j 3.30 3.70 k 1.50 1.90 l 9.30 9.70 m 2.50 2.90 n 3.40 3.80 p 4.40 4.80 r 0.60 0.80 all dimensions in mm characteristic symbol kbj 4005g kbj 401g kbj 402g kbj 404g kbj 406g kbj 408g kbj 410g unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 70 140 280 420 560 700 v average rectified output current @ t c = 115c i o 4.0 a non-repetitive peak forward surge current, 8.3 ms single half-sine-wave superimposed on rated load i fsm 120 a forward voltage per element @ i f = 2.0a v fm 1.0 v peak reverse current @ t c = 25c at rated dc blocking voltage @ t c = 125c i rm 5.0 500 a i 2 t rating for fusing, t <8.3ms (note 3) i 2 t60a 2 s typical total capacitance per element (note 1) c t 40 pf typical thermal resistance (note 2) r jc 5.5 c/w operating and storage temperature range t j ,t stg -65 to +150 c notes: 1. measured at 1.0 mhz and applied reverse voltage of 4.0v dc. 2. thermal resistance from junction to case per element. unit mounted on 75 x 75 x 1.6mm aluminum plate heat sink. 3. non-repetitive, for t 1ms and 8.3ms. 4. rohs revision 13.2.2003. glass and high temperature solder exemptions applied, see eu directive annex notes 5 and 7. features
ds21206 rev. 9 - 2 2 of 3 kbj4005g-kbj410g www.diodes.com 0.01 0.1 1.0 10 0 0.4 0.8 1.2 1.6 1.8 v , instantaneous forward voltage (v) fi g .2 t y pical forward characteristics f i , instantaneous forward current (a) f t = 150c j t=25c j pulse width = 300s 0 40 80 120 160 180 1 10 100 i , peak forward surge current (a) fsm number of cycles at 60 hz fi g . 3 max non-repetitive sur g e current t = 150c j single half-sine-wave 10 100 1000 0.1 1.0 10 100 c , total capacitance (pf) t v , reverse voltage (v) fi g .4 t y pical total capacitance, per element r f = 1mhz t=25c j 0.1 1.0 10 100 1000 02040 6080 100 120 140 i , instantaneous reverse current (a) r percent of rated peak reverse voltage (%) fi g .5 t y pical reverse characteristics t = 150c j t = 125c j t = 100c j t=25c j 0 1 2 3 4 5 6 25 50 75 100 125 150 i , average rectified current (a) o t , case temperature (c) fi g . 1 forward current deratin g curve c resistive or inductive load
notes: 5. for packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf ds21206 rev. 9 - 2 3 of 3 kbj4005g-kbj410g www.diodes.com ordering information device packaging shipping kbj4005g kbj 20/tube kbj401g kbj 20/tube kbj402g kbj 20/tube kbj404g kbj 20/tube kbj406g kbj 20/tube kbj408g kbj 20/tube kbj410g kbj 20/tube ordering information (note 5) important notice life support diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes witho ut further notice to any product herein. diodes incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. the user of products in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on our website, harmless against all damages. diodes incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written appr oval of the president of diodes incorporated.
|